User's Manual
Chapter 4 On-board Remote Management
Configurations Page
Quantum SuperLoader 3 User’s Guide 56
To set the system time:
1 Using the first drop-down list next to
Time Zone, select the number of
hours difference between your local time and Greenwich Mean Time
(GMT).
2 Below the
Time Zone field, select the current Month drop-down list.
3 In the
Day field, type the current day of the month.
4 In the
Year field, type the current year.
5 In the
Hour text box, type the current hour in 24-hour format.
6 In the
Minute text box, type the current minute.
7 Click
submit to save the information.
Setting Network Options
4
When you originally installed the autoloader, you set the Ethernet
configurations through the front LCD panel. However, you can modify
them through On-board Remote Management. The options include
Current Network Parameters, Set IP, and Set Network Configuration. To
change the Ethernet configurations:
To view the
Current Network Parameters:
1 From any page, click the
Configurations heading. The Configurations
screen displays.
2 From the
Configurations menu, click Networking.
The
Current Network Parameters area displays the current IP address,
MAC address, and the speed setting for the Ethernet connection.
In the
Set IP section, if a check mark displays in the box next to DHCP, the
dynamic IP address option is enabled. This means that with every reset of
the system, the IP address may change depending on the network
administrator's settings.
To
Set IP address:
1 Clear the check box to remove the check mark from the
DHCP field, if
applicable.
Note: For example, if you live in Colorado, the time difference is
–6 hours in the summer and –7 hours in the winter.