User's Manual
Chapter 4 On-board Remote Management
Configurations Page
Quantum SuperLoader 3 User’s Guide 50
Feedback on Pages 4
If there is feedback from the system when you submit a request, the
feedback displays beneath the
submit button. In some cases, you may
have to scroll to see the feedback information.
Configurations Page
The Configurations page includes a submenu on the left-hand side of the
page. You can set the
System Operations, Networking, and Security
options from this page.
System Operations
Options 4
The options listed under System Operations include SCSI ID (or Fibre
Channel)
, SAS, Mode, Compression, Cleaning Tape, Magazines, and System
Time
.
SCSI ID
4
You can change the drive's SCSI ID from On-board Remote Management.
To change the SCSI ID:
1 From any page, click the
Configurations heading. The Configurations
screen displays.
2 Under
System Operations, select SCSI ID.
3 Click the drop-down box to select a number to assign for the new
SCSI ID.
4 Click
submit.
Note: You must perform a system reset before the new SCSI ID
takes effect, or you can use the front panel to power cycle
your machine.