User's Manual

Chapter 3 Operating the Autoloader
Viewing Status Information
Quantum SuperLoader 3 User’s Guide 44
If you want to move the cartridge, scroll until the location you want
to move to displays under
To:, and then press Enter. If you do not
want to move the cartridge, press
Escape.
Viewing Tape Drive
Status 3
To view the tape drive status:
1 From the main menu, scroll to
Status, and then press Enter.
2 From the
Status submenu, scroll to Drive, and then press Enter.
3 From the
Drive submenu, scroll to Status, and then press Enter.
A list of messages displays. These messages may include:
Table 5 Drive Status Fields
Viewing Tape Drive
Version 3
To view the tape drive version:
1 From the main menu, scroll to
Status, and then press Enter.
2 From the
Status submenu, scroll to Drive, and then press Enter.
3 From the
Drive submenu, scroll to Version, and then press Enter.
A list of messages displays. These messages may include:
Field Description
SCSI ID or
Fibre Channel
Indicates the drive’s SCSI ID number or a Fibre
Channel drive.
SAS Interface Indicates a SAS drive.
Loader LUN Indicates the Logical Unit Number (LUN) of the
media changer device.
Compression Indicates whether the tape drive compression is
enabled or disabled.
Drive Tape Indicates whether the tape drive is present or not.