User's Manual
Chapter 3 Operating the Autoloader
Viewing Status Information
Quantum SuperLoader 3 User’s Guide 42
Table 3 Autoloader Status
Viewing Firmware
Version 3
To view the current firmware version, use the following procedure:
1 From the main menu, scroll to
Status, and then press Enter.
2 From the
Status submenu, scroll to Autoloader, and then press Enter.
3 From the
Autoloader submenu, scroll to Version, and then press Enter.
A list of messages displays on the LCD. The firmware version is
listed as
Firmware: VX.XX where X.XX is the current installed version
of the firmware.
Status Message Description
Magazines L=* The left magazine is present.
R=* The right magazine is present.
SCSI ID A digit 0 through 7
(default 5)
The assigned SCSI ID for the autoloader.
SAS SAS Interface SAS connection.
Topology
(Fibre Channel)
Auto Negotiate,
Loop, or P2P
The configured Fibre Channel connection.
Speed
(Fibre Channel)
Auto Negotiate,
1 Gig, or 2 Gig
The configured Fibre Channel speed.
Loop ID
(Fibre Channel)
0 – 127 Valid only with Topology set to Loop.
Mode Random The change mode is set to Random.
SEQUENTIAL The change mode is set to Sequential.
BC Reader Yes or No A bar code reader is present.