User's Manual

Chapter 3 Operating the Autoloader
Using Cartridges
Quantum SuperLoader 3 User’s Guide 34
3 From the Eject submenu, scroll to Tape, scroll to Mailslot, and then
press
Enter.
4 Scroll to
By Location.
Slots that are occupied by a data cartridge are indicated by an asterisk
(
*). The slot that is occupied by a cleaning tape is indicated with an at
sign (
@) if Auto Clean is enabled. Scroll to the slot containing the
cartridge you want to eject.
5 Press
Enter.
The cartridge you want is ejected from the mailslot.
To eject a cartridge from the tape drive:
1 From the main menu, scroll to
Commands, and then press Enter.
2 From the
Commands submenu, scroll to Eject, and then press Enter.
3 From the
Eject submenu, scroll to Cartridge, and then press Enter.
4 Scroll to
From Drive, and then press Enter.
The cartridge you want is ejected from the mailslot.