User's Manual
Chapter 7 Customer Replaceable Units (CRUs)
Rack Mounting the Autoloader
Quantum SuperLoader 3 User’s Guide 99
Figure 15 Attaching Support
Brackets
5 With the help of a second installer, insert the autoloader into the rack
so that the autoloader brackets slide into corresponding support
brackets on the rear rails and the tabs at the front of the autoloader
align flush with the clip nuts on the front rails (see figure 16
).
Caution: Do not release the front end of the autoloader until it
can be secured to the rack.
Outer cover of rack
Rear rail in rack
Support bracket
Clip nuts
Rack
screws