User's Guide
Table Of Contents
- Preface
- Theory of Operation
- Media Changer Commands
- Overview of Command and Status Processing
- Media Changer Command Descriptions
- Initialize Element Status Command (07h)
- Inquiry Command (12h)
- Load Unload Command (1Bh)
- Log Sense Command (4Dh)
- Mode Select (6) / (10) Command (15h / 55h)
- Mode Sense (6) / (10) Command (1Ah/ 5Ah)
- Move Medium Command (A5h)
- Persistent Reserve In Command (5Eh)
- Persistent Reserve Out Command (5Fh)
- Position to Element Command (2Bh)
- Prevent/Allow Medium Removal (1Eh)
- Read Buffer Command (3Ch)
- Read Element Status Command (B8h)
- Release Element (10) Command (57h)
- Release Unit (6) Command (17h)
- Report Device Identifier Command (A3h)
- Report LUNS Command (A0h)
- Request Sense Command (03h)
- Reserve Element (10) Command (56h)
- Reserve Element (6) Command (16h)
- Send Diagnostic Command (1Dh)
- Set Device Identifier Command (A4h)
- Test Unit Ready Command (00h)
- Write Buffer Command (3Bh)
- Index
Chapter 2 Media Changer Commands
Mode Sense (6) / (10) Command (1Ah/ 5Ah)
Quantum SuperLoader 3 Software Interface Guide 62
Extended Device
Capabilities Page 2
The extended device capabilities page defines characteristics of the media
changer. This information may be employed by the application client to
determine functions permitted by the media changer.
Figure 43 Extended Device
Capabilities Page
Bit
Byte76543210
0
PS (0) SPF (1) Page Code (1Fh)
1
SubPage Code (41h)
2-3
(MSB)
Page Length (10h)
(LSB)
4
Reserved
MVPRV
MVCL MVOP USRCL USROP IEST
5
Reserved DTEDA RSSEA
MVTRY
IEMGZ SMGZ
6
Reserved TREXC LCKIE LCKD
7
Reserved SPMER
DPMER
PEPOS
8
Reserved UCST
9-19
Reserved