User's Guide
Table Of Contents
- Preface
- Theory of Operation
- Media Changer Commands
- Overview of Command and Status Processing
- Media Changer Command Descriptions
- Initialize Element Status Command (07h)
- Inquiry Command (12h)
- Load Unload Command (1Bh)
- Log Sense Command (4Dh)
- Mode Select (6) / (10) Command (15h / 55h)
- Mode Sense (6) / (10) Command (1Ah/ 5Ah)
- Move Medium Command (A5h)
- Persistent Reserve In Command (5Eh)
- Persistent Reserve Out Command (5Fh)
- Position to Element Command (2Bh)
- Prevent/Allow Medium Removal (1Eh)
- Read Buffer Command (3Ch)
- Read Element Status Command (B8h)
- Release Element (10) Command (57h)
- Release Unit (6) Command (17h)
- Report Device Identifier Command (A3h)
- Report LUNS Command (A0h)
- Request Sense Command (03h)
- Reserve Element (10) Command (56h)
- Reserve Element (6) Command (16h)
- Send Diagnostic Command (1Dh)
- Set Device Identifier Command (A4h)
- Test Unit Ready Command (00h)
- Write Buffer Command (3Bh)
- Index
Chapter 2 Media Changer Commands
Log Sense Command (4Dh)
Quantum SuperLoader 3 Software Interface Guide 27
Last n Error Events Page
(07h) 2
This page returns the ASCII text for the hard error event log. This page
consists of a page header, a parameter header and parameter value. The
parameter value returned consists of the ASCII text for the
EEROM Hard
Error Log
.
Figure 13 Last n Error Events
Log Sense Header
Table 9 Last n Error Events
Log Sense Header
Bit
Byte76543210
0
Reserved Page Code (07h)
1
Reserved
2 - 3
(MSB)
Page Length (n)
(LSB)
Field Name Description
Page Code The
Page Code echoes the page code that was
specified in the
LOG SENSE command descriptor
block.
Page Length The
Page Length field specifies the total number of
bytes contained in this log page, not including the
four bytes that make up the header.