User's Guide
Table Of Contents
- Preface
- Theory of Operation
- Media Changer Commands
- Overview of Command and Status Processing
- Media Changer Command Descriptions
- Initialize Element Status Command (07h)
- Inquiry Command (12h)
- Load Unload Command (1Bh)
- Log Sense Command (4Dh)
- Mode Select (6) / (10) Command (15h / 55h)
- Mode Sense (6) / (10) Command (1Ah/ 5Ah)
- Move Medium Command (A5h)
- Persistent Reserve In Command (5Eh)
- Persistent Reserve Out Command (5Fh)
- Position to Element Command (2Bh)
- Prevent/Allow Medium Removal (1Eh)
- Read Buffer Command (3Ch)
- Read Element Status Command (B8h)
- Release Element (10) Command (57h)
- Release Unit (6) Command (17h)
- Report Device Identifier Command (A3h)
- Report LUNS Command (A0h)
- Request Sense Command (03h)
- Reserve Element (10) Command (56h)
- Reserve Element (6) Command (16h)
- Send Diagnostic Command (1Dh)
- Set Device Identifier Command (A4h)
- Test Unit Ready Command (00h)
- Write Buffer Command (3Bh)
- Index
Chapter 2 Media Changer Commands
Inquiry Command (12h)
Quantum SuperLoader 3 Software Interface Guide 13
Figure 4 Standard Inquiry Data
Bit
Byte 7 6 5 4 3 2 1 0
0
Peripheral Qualifier Peripheral Device Type
1
RMB Reserved
2
Version
3
AERC Obsolete NormACA HiSup Response Data Format
4
Additional Length (n-4)
5
SCCS Reserved
6
BQue EncServ Reserved MultiP MChngr Obsolete Obsolete Add16
7
RelAdr Obsolete Wbus16 Sync Linked Obsolete CmdQue Reserved
8-15
Vendor Identification (QUANTUM)
16-31
Product Identification (UHDL)
32-35
Product Revision Level (xxxx)
36
Language
37
Reserved Image Type
38-40
Reserved
41
Firmware Personality
42
Firmware Subpersonality
43
Vendor-Specific Subtype