User's Guide

Chapter 2 Media Changer Commands
Overview of Command and Status Processing
Quantum SuperLoader 3 Software Interface Guide 8
Table 1 Supported Media
Changer Commands
Command Operation Code
Initialize Element Status Command (07h)
07h
“Inquiry Command (12h)” on page 11
12h
“Load Unload Command (1Bh)” on page 22
1Bh
“Log Sense Command (4Dh)” on page 23
4Dh
“Mode Select (6) / (10) Command (15h / 55h)” on page 41
15h / 55h
“Mode Sense (6) / (10) Command (1Ah/ 5Ah)” on page 48
1Ah / 5Ah
“Move Medium Command (A5h)” on page 67
A5h
“Persistent Reserve In Command (5Eh)” on page 69 (SCSI-3)
5Eh
“Persistent Reserve Out Command (5Fh)” on page 78 (SCSI-3)
5Fh
“Position to Element Command (2Bh)” on page 92
2Bh
“Prevent/Allow Medium Removal (1Eh)” on page 94
1Eh
“Read Buffer Command (3Ch)” on page 95
3Ch
“Read Element Status Command (B8h)” on page 100
B8h
“Release Element (10) Command (57h)” on page 113
57h
“Release Unit (6) Command (17h)” on page 116
17h
“Report Device Identifier Command (A3h)” on page 117
A3h
“Report LUNS Command (A0h)” on page 120
A0h
“Request Sense Command (03h)” on page 122
03h
“Reserve Element (10) Command (56h)” on page 130 (SCSI-3)
56h
“Reserve Element (6) Command (16h)” on page 133
16h
“Send Diagnostic Command (1Dh)” on page 135
1Dh
“Set Device Identifier Command (A4h)” on page 137 (SCSI-3)
A4h
“Test Unit Ready Command (00h)” on page 139
00h