User's Guide
Table Of Contents
- Preface
- Theory of Operation
- Media Changer Commands
- Overview of Command and Status Processing
- Media Changer Command Descriptions
- Initialize Element Status Command (07h)
- Inquiry Command (12h)
- Load Unload Command (1Bh)
- Log Sense Command (4Dh)
- Mode Select (6) / (10) Command (15h / 55h)
- Mode Sense (6) / (10) Command (1Ah/ 5Ah)
- Move Medium Command (A5h)
- Persistent Reserve In Command (5Eh)
- Persistent Reserve Out Command (5Fh)
- Position to Element Command (2Bh)
- Prevent/Allow Medium Removal (1Eh)
- Read Buffer Command (3Ch)
- Read Element Status Command (B8h)
- Release Element (10) Command (57h)
- Release Unit (6) Command (17h)
- Report Device Identifier Command (A3h)
- Report LUNS Command (A0h)
- Request Sense Command (03h)
- Reserve Element (10) Command (56h)
- Reserve Element (6) Command (16h)
- Send Diagnostic Command (1Dh)
- Set Device Identifier Command (A4h)
- Test Unit Ready Command (00h)
- Write Buffer Command (3Bh)
- Index
Index
Quantum SuperLoader 3 Software Interface Guide 144
R
Read Buffer command 95
Read Element Status command
100
Release Element command
113
Release Unit command
media changer
116
Report Device Identifier command
media changer
117
Report LUNS command
media changer
120
Request Sense command
media changer
122
sense keys (media changer)
125
supported ASC/ASCQ codes
(media changer) 126
Reserve Element command
130
media changer
133
S
Send Diagnostic command
media changer 135
Sense keys
Request Sense (media changer)
125
Set Device Identifier command
137
T
Tape drive commands
Load Unload
22
Read Buffer 95
Set Device Identifier
137
Test Unit Ready command
media changer 139
W
Write Buffer command
media changer
140