User's Guide
Table Of Contents
- Preface
- Theory of Operation
- Media Changer Commands
- Overview of Command and Status Processing
- Media Changer Command Descriptions
- Initialize Element Status Command (07h)
- Inquiry Command (12h)
- Load Unload Command (1Bh)
- Log Sense Command (4Dh)
- Mode Select (6) / (10) Command (15h / 55h)
- Mode Sense (6) / (10) Command (1Ah/ 5Ah)
- Move Medium Command (A5h)
- Persistent Reserve In Command (5Eh)
- Persistent Reserve Out Command (5Fh)
- Position to Element Command (2Bh)
- Prevent/Allow Medium Removal (1Eh)
- Read Buffer Command (3Ch)
- Read Element Status Command (B8h)
- Release Element (10) Command (57h)
- Release Unit (6) Command (17h)
- Report Device Identifier Command (A3h)
- Report LUNS Command (A0h)
- Request Sense Command (03h)
- Reserve Element (10) Command (56h)
- Reserve Element (6) Command (16h)
- Send Diagnostic Command (1Dh)
- Set Device Identifier Command (A4h)
- Test Unit Ready Command (00h)
- Write Buffer Command (3Bh)
- Index
Chapter 2 Media Changer Commands
Request Sense Command (03h)
Quantum SuperLoader 3 Software Interface Guide 128
26 01 Parameter List Error, Parameter Not Supported
26 02 Parameter List Error, Parameter Value Invalid
26 03 Threshold Parameters Not Supported
26 04 Invalid Release of Persistent Reservation
39 00 Saving Parameters Not Supported
3B 0D Media Destination Element Full
3B 0E Media Source Element Empty
3B 11 Magazine Not Accessible
3B 12 Magazine Removed
53 02 Media Removal Prevented
55 04 Insufficient Registration Resources
06h
UNIT ATTENTION
28 00 Not Ready To Ready Transition
28 01 Import/Export Element Accessed
29 00 Reset Occurred
29 01 Power On Occurred
29 02 SCSI BUS Reset Occurred
29 03 BUS Device Reset Function Occurred
29 04 Device Internal Reset
29 05 Transceiver Mode Changed to Single-Ended
29 06 Transceiver Mode Changed to LVD
2A 01 Mode Parameters Changed
2A 02 Log Parameters Changed
2A 03 Reservations Preempted
2A 04 Reservations Released
Sense Key ASC ASCQ Description