User's Guide
Table Of Contents
- Preface
- Theory of Operation
- Media Changer Commands
- Overview of Command and Status Processing
- Media Changer Command Descriptions
- Initialize Element Status Command (07h)
- Inquiry Command (12h)
- Load Unload Command (1Bh)
- Log Sense Command (4Dh)
- Mode Select (6) / (10) Command (15h / 55h)
- Mode Sense (6) / (10) Command (1Ah/ 5Ah)
- Move Medium Command (A5h)
- Persistent Reserve In Command (5Eh)
- Persistent Reserve Out Command (5Fh)
- Position to Element Command (2Bh)
- Prevent/Allow Medium Removal (1Eh)
- Read Buffer Command (3Ch)
- Read Element Status Command (B8h)
- Release Element (10) Command (57h)
- Release Unit (6) Command (17h)
- Report Device Identifier Command (A3h)
- Report LUNS Command (A0h)
- Request Sense Command (03h)
- Reserve Element (10) Command (56h)
- Reserve Element (6) Command (16h)
- Send Diagnostic Command (1Dh)
- Set Device Identifier Command (A4h)
- Test Unit Ready Command (00h)
- Write Buffer Command (3Bh)
- Index
Preface
Quantum SuperLoader 3 Software Interface Guide xiv
Purpose
This interface guide describes the procedures and issues involved in the
development of software applications and utilities to communicate with
the Quantum SuperLoader 3.
•SCSI interfaces
• Media Changer Commands
Organization
This reference manual is organized as follows:
• Chapter 1,
Theory of Operation describes differences between the
SuperLoader 3 models, media changer elements, events, and
automatic drive cleaning.
• Chapter 2,
Media Changer Commands describes the SCSI protocol
features implemented in the media changer.