User's Guide
Table Of Contents
- Preface
- Theory of Operation
- Media Changer Commands
- Overview of Command and Status Processing
- Media Changer Command Descriptions
- Initialize Element Status Command (07h)
- Inquiry Command (12h)
- Load Unload Command (1Bh)
- Log Sense Command (4Dh)
- Mode Select (6) / (10) Command (15h / 55h)
- Mode Sense (6) / (10) Command (1Ah/ 5Ah)
- Move Medium Command (A5h)
- Persistent Reserve In Command (5Eh)
- Persistent Reserve Out Command (5Fh)
- Position to Element Command (2Bh)
- Prevent/Allow Medium Removal (1Eh)
- Read Buffer Command (3Ch)
- Read Element Status Command (B8h)
- Release Element (10) Command (57h)
- Release Unit (6) Command (17h)
- Report Device Identifier Command (A3h)
- Report LUNS Command (A0h)
- Request Sense Command (03h)
- Reserve Element (10) Command (56h)
- Reserve Element (6) Command (16h)
- Send Diagnostic Command (1Dh)
- Set Device Identifier Command (A4h)
- Test Unit Ready Command (00h)
- Write Buffer Command (3Bh)
- Index
Chapter 2 Media Changer Commands
Report Device Identifier Command (A3h)
Quantum SuperLoader 3 Software Interface Guide 117
Report Device Identifier Command (A3h)
The REPORT DEVICE IDENTIFIER command requests that the device
server send device identification information to the applicable client.
Figure 69 Report Device
Identifier Descriptor
Table 54 Report Device
Identifier Command Descriptor
Block
Bit
Byte765 4 3210
0
Operation Code (A3h)
1
Reserved Service Action (05h)
2 - 5
Reserved
6 - 9
(MSB)
Allocation Length
(LSB)
10
Reserved
11
Unused Reserved Flag Link
Field Description
Service
Action
Must be
05h. Any other value will return Check
Condition
, Illegal Request.