User's Guide
Table Of Contents
- Preface
- Theory of Operation
- Media Changer Commands
- Overview of Command and Status Processing
- Media Changer Command Descriptions
- Initialize Element Status Command (07h)
- Inquiry Command (12h)
- Load Unload Command (1Bh)
- Log Sense Command (4Dh)
- Mode Select (6) / (10) Command (15h / 55h)
- Mode Sense (6) / (10) Command (1Ah/ 5Ah)
- Move Medium Command (A5h)
- Persistent Reserve In Command (5Eh)
- Persistent Reserve Out Command (5Fh)
- Position to Element Command (2Bh)
- Prevent/Allow Medium Removal (1Eh)
- Read Buffer Command (3Ch)
- Read Element Status Command (B8h)
- Release Element (10) Command (57h)
- Release Unit (6) Command (17h)
- Report Device Identifier Command (A3h)
- Report LUNS Command (A0h)
- Request Sense Command (03h)
- Reserve Element (10) Command (56h)
- Reserve Element (6) Command (16h)
- Send Diagnostic Command (1Dh)
- Set Device Identifier Command (A4h)
- Test Unit Ready Command (00h)
- Write Buffer Command (3Bh)
- Index
Chapter 2 Media Changer Commands
Persistent Reserve Out Command (5Fh)
Quantum SuperLoader 3 Software Interface Guide 91
Table 41 Device Server
Interpretation of Service and
Scope Value
Parameters
Service
Action
Allowed
Scope Type
Service Action
Reservation Key Reservation Key
Register Ignored Ignored Valid Valid
Reserve LU Valid Ignored Valid
Release LU Valid Ignored Valid
Clear Ignored Ignored Ignored Valid
Pre-empt LU Valid Valid Valid
Pre-empt
and Clear
LU Valid Valid Valid
Register
and Ignore
Existing
Key
Ignored Ignored Valid Ignored