Specifications

L100 Configuration Guide (SCSI - LVD)
(SDLT320, LTO, LTO2)
Step 1 (Required) L100 Library Base Configuration
Order quantity (1)
SG-XLIBL100SDLV-BS L100 SDLT320 Base Low-Voltage Differential (LVD)
SG-XLIBL100LLV-BS L100 LTO/LTO2 Base Low-Voltage Differential (LVD)
Notes:
Base configurations do not include any tape drives and need to be ordered separately.
Each Base Config Includes:
Library Enclosure (Rackmount)
US Power Cord and power cord jumper cable
Install and User Guides CD-ROM
(99) SDLT data cartridge barcode labels and (33) cleaning cartridge barcode labels (SDLT Only)
(220) LTO/LTO2 data cartridge barcode labels and (33) cleaning cartridge barcode labels (LTO/LTO2
Only)
Installation
Step 2 (Optional) Tape Drives
Order up to (6) per L100.
SG-XTAPSDLT3-MOD SDLT320 Tape Drive Low-Voltage Differential (LVD)
(HD68 Connector)
SG-XTAPLTOLVD-MOD LTO LVD Tape Drive Low-Voltage Differential (LVD)
(HD68 Connector)
SG-XTAPLTO2LVD-MOD LTO2 LVD Tape Drive Low-Voltage Differential (LVD)
(HD68 Connector)
Notes:
If a sixth tape drive is installed, the customer will lose (12) LTO/LTO2 cartridge slots or (10)
DLT/SDLT cartridge slots.
Different drive types cannot be mixed in a library.
Each Tape Drive Includes:
Tape drive
Installation guide
SCSI jumper cable and Terminator
(2) drive filler plates
Step 3 (Required) Host Bus Adapters
Order appropriate HBA and quantity. (see notes)
X6758A PCI, Dual-channel Low-Voltage Differential (LVD) (VHDCI Connectors)
Notes:
One X6758A needed for each (4) SDLT320, LTO or LTO2 LVD tape drives in the library. Up to (2)
drives can be connected to each X6758A SCSI channel.
Step 4 (Required) SCSI Cables
Order appropriate cable and quantity. (see notes)
Just the Facts May 2003 28