User's Manual
Table Of Contents
- Contents
- Figures
- Tables
- Preface
- Tape Drive Product Information
- SDLT 600 Tape Drive Specifications
- Installing Your Tape Drive
- Warranty Note
- Safety, Handling, and ESD Protection
- Pre-Installation Guidelines
- Configuring and Installing an Internal Tape Drive with SCSI Interface
- Configuring and Installing an Internal Tape Drive with Fibre Channel Interface
- Configuring and Installing a Tabletop Tape Drive with SCSI Interface
- Configuring and Installing a Tabletop Tape Drive with SCSI Interface
- Confirming the Installation
- Using Your Tape Drive
- Regulatory Compliance
- Super DLTtape I and Super DLTtape II Data Cartridges
- DLTtape VS1 Data Cartridge
- Glossary
Chapter 2 SDLT 600 Tape Drive Specifications
Recording Media Specifications
SDLT 600 Product Manual 34
Physical Data Cartridge 2 A durable plastic case encloses the Super DLTtape II media, as shown in
figure 4
.
Figure 4 Super DLTtape II
Data Cartridge
Media Shipping,
Operating, and Storage
Specifications
2
The optimum media shipping conditions are described in table 21.
Table 21 Super DLTtape II
Media Shipping Limits
Shipping Conditions
Temperature –18 °C to 49 °C (0 °F to 120 °F)
Relative Humidity 20 to 80% (non-condensing)
Maximum Wet Bulb
Temperature
26 °C (79 °F)
Maximum Dew Point 2 °C (36 °F)