User's Manual
Table Of Contents
- Contents
- Figures
- Tables
- Preface
- Tape Drive Product Information
- SDLT 600 Tape Drive Specifications
- Installing Your Tape Drive
- Warranty Note
- Safety, Handling, and ESD Protection
- Pre-Installation Guidelines
- Configuring and Installing an Internal Tape Drive with SCSI Interface
- Configuring and Installing an Internal Tape Drive with Fibre Channel Interface
- Configuring and Installing a Tabletop Tape Drive with SCSI Interface
- Configuring and Installing a Tabletop Tape Drive with SCSI Interface
- Confirming the Installation
- Using Your Tape Drive
- Regulatory Compliance
- Super DLTtape I and Super DLTtape II Data Cartridges
- DLTtape VS1 Data Cartridge
- Glossary
Chapter 2 SDLT 600 Tape Drive Specifications
Functional Specifications
SDLT 600 Product Manual 23
Shock and Vibration
Specifications
2
The following tables provide non-operating and operating shock and
vibration specifications for the SDLT 600 tape drive system.
Table 11 Non-operating Shock
Specifications (Unpackaged)
Table 12 Non-Operating
Shock Specifications
(Packaged, Drop)
Table 13 Non-Operating
Vibration Specifications
(Unpackaged)
Shock (Unpackaged)
Pulse Shape Square wave ½ sine pulse
Peak Acceleration 40 G 140 G
Duration 10 ms (180 inches/
second)
2 ms
Application X,Y,Z axes, twice in each axis (once in each
direction)
Shock
(Packaged,
Drop)
Height
of Drop
Number
of Drops Package Weight
Drop 42 inches 16 drops
total
0 lbs. < package weight
≤
20 lbs.
36 inches 16 drops
total
20 lbs. < package weight
≤
50 lbs.
Vibration (Unpackaged)
Type Sine Sweep
Frequency Range 5 to 500 to 5 Hz Upward and
downward sweep
Acceleration Level 0.02" DA
1.0 G
Between 5 and 31 Hz
(crossover)
Between 31 and 500
Hz (crossover)