User's Manual

Chapter 8 Troubleshooting
Saving and E-mailing the Library Configuration Record
Scalar i500 User’s Guide 328
• Serial Attached SCSI (SAS) tape drives—partition name, number
of tape drives in partition, drive location, SCSI element address,
interface type, drive type, ready state, online status, barcode,
media type, element address, vendor, model, physical serial
number, logical serial number, SCSI ID, firmware level, control
path status.
• I/O blade information—blade number, blade ID, location
coordinates, serial number, WWN, firmware version, and control
LUN.
• Partition information—number of partitions, number of cleaning
slots, number of unassigned slots, number of import/export
(I/E) slots, I/E manual assignment setting, partition name,
number of slots, number of tape drives, and number of
cartridges.
E-mailing the
Configuration Record 8
Administrative users can use the Tools - Email Configuration Record
screen on the web client to e-mail the library configuration record.
Do not enter more than one e-mail address in the
E-mail Address text box
on the
Tools - Email Configuration Record screen. If you need to send the
configuration record to multiple e-mail addresses, repeat the procedure
for each e-mail address.
Before you can e-mail the configuration record, the library e-mail account
must be configured. For information on setting up the e-mail account, see
You cannot e-mail the library configuration record from the operator
panel. The path to open the appropriate screen is as follows:
• From the web client, select
Tools > Email Configuration Record.
Saving the Configuration
Record 8
Administrative users can use the Tools - Save Configuration Record screen
on the web client to e-mail the library configuration record.
Note: If the FC tape drive is attached to an FC I/O blade, the
WWN indicates the WWN of the I/O blade, not the
tape drive.