User's Manual

Chapter 7 Installing, Removing, and Replacing
Permanently Removing Expansion Modules From an Existing Library
Scalar i500 User’s Guide 244
2 Add the tape drives to the modules. For details, see Adding,
Removing, and Replacing Tape Drives on page 303.
3 Add the power supplies. For details, see Adding, Removing, and
Replacing Power Supplies on page 281.
4 Add the LCB to the control module. For details, see Removing and
Replacing the Library Control Blade and LCB Compact Flash Card on
page 276.
5 If your library contains FC I/O blades, install both the I/O blades
and the accompanying fan blades in the expansion module. For
details, see Adding, Removing, and Replacing FC I/O Blades
on
page 306 and Adding, Removing, and Replacing the I/O Fan Blade
on page 317.
1 Y-rail in unlocked, functional position