User's Manual

Chapter 7 Installing, Removing, and Replacing
Cabling the Library
Scalar i500 User’s Guide 189
Connecting Library SAS
Cables Directly to Host 7
Use this procedure, along with Figure 22 and Figure 23, to connect SAS
cables directly to the host.
Warning: All libraries taller than 14U must be installed in a rack
having a main protective earthing (grounding) terminal,
and power must be supplied via an industrial plug and
socket-outlet and/or an appliance coupler complying with
IEC 60309 (or an equivalent national standard) and having
a protective earth (ground) conductor with a cross
sectional area of at least 1.5 mm
2
(14 AWG).
To ensure proper airflow and access space, Allow 60 cm
(24 inches) in the front and back of the library.