User's Manual

Chapter 5 Getting Information
Viewing FC I/O Blade Information
Scalar i500 User’s Guide 161
4 To e-mail the report data as a .csv file, type the name of a recipient in
the empty field next to the
E-mail button, then click E-mail.
Figure 15 Saving and E-
mailing the Report Data
Viewing FC I/O Blade Information
Administrative users can view information about all the FC I/O blades
installed in the library. The
Tools - Blade Information screen lists the
following FC I/O blade information:
•
Location—Library location coordinates of the blade:
[module,blade#], where blade# is 1 for the top blade in the module
and 2 for the bottom blade in the module.
•
Firmware Version—Firmware version of the blade (part of the library
firmware).
•
Serial Number— Serial number of the blade.
•
WWNN—World Wide Node Name of the blade.
•
CCL— Command control LUN.
•
Status/State—The status of the blade can be: Ready, Not Ready, Auto
Level Failed, Auto Leveling Booting, and Unknown.
The paths to open the appropriate screens are as follows:
• From the web client, select
Tools > I/O Blade Info.
• From the operator panel, select
Tools > Blade Info.