User's Guide
Table Of Contents
- SCSI Command Support
- SCSI Commands
- Initialize Element Status - 07h
- Initialize Element Status With Range - E7h
- Inquiry - 12h
- Log Sense - 4Dh
- Mode Select (6) - 15h
- Mode Select (10) - 55h
- Mode Sense (6) - 1Ah
- Mode Sense (10) - 5Ah
- Mode Pages
- Move Medium – A5h
- Persistent Reserve In – 5Eh
- Persistent Reserve Out – 5Fh
- Position to Element – 2Bh
- Prevent Allow Medium Removal – 1Eh
- Read Buffer – 3Ch
- Read Element Status – B8h
- Release Element (6) – 17h
- Release Element (10) – 57h
- Report LUNS – A0h
- Request Sense – 03h
- Request Volume Element Address - B5h
- Reserve Element (6) - 16h
- Reserve Element (10) - 56h
- Send Diagnostic - 1Dh
- Send Volume Tag - B6h
- Test Unit Ready (00h)
- Write Buffer (3Bh)
50 SCSI Commands
Persistent Reserve In Response
Response data is returned depending on the requested service action.
Read Keys Response
The response for a Read Keys service action is shown the following table.
Generation – This field is a 32-bit counter that is incremented every time a PERSISTENT RESERVE OUT
command requests a Register, a Register and Ignore Existing Key, a Clear, a Preempt, or a Preempt and
Abort service action. This counter is not maintained across power cycles.
Additional Length – This field indicates the length in bytes of the Reservation Key List.
Reservation Key List – This is a list of all the 8-byte reservation keys that have been registered through
the PERSISTENT RESERVE OUT command.
Table 46 Read Keys Response
Bit
Byte
76543210
0
:
3
Generation
4
:
7
Additional Length (n-7)
Reservation Key List
8
:
15
First Reservation Key
:
n-7
:
n
Last Reservation Key