User's Guide
Table Of Contents
- SCSI Command Support
- SCSI Commands
- Initialize Element Status - 07h
- Initialize Element Status With Range - E7h
- Inquiry - 12h
- Log Sense - 4Dh
- Mode Select (6) - 15h
- Mode Select (10) - 55h
- Mode Sense (6) - 1Ah
- Mode Sense (10) - 5Ah
- Mode Pages
- Move Medium – A5h
- Persistent Reserve In – 5Eh
- Persistent Reserve Out – 5Fh
- Position to Element – 2Bh
- Prevent Allow Medium Removal – 1Eh
- Read Buffer – 3Ch
- Read Element Status – B8h
- Release Element (6) – 17h
- Release Element (10) – 57h
- Report LUNS – A0h
- Request Sense – 03h
- Request Volume Element Address - B5h
- Reserve Element (6) - 16h
- Reserve Element (10) - 56h
- Send Diagnostic - 1Dh
- Send Volume Tag - B6h
- Test Unit Ready (00h)
- Write Buffer (3Bh)
Quantum Scalar Intelligent Libraries SCSI Reference Guide Guide 43
Parameter List Length – This field is set to 0Ah (10).
Log Errors (LogErr) – This field is set to 0 to indicate that logging of informational exception conditions is
vendor specific (unique to the library in this case).
Test – This field is set to 0 to indicate that test failure indications will not be generated.
Disable Exception Control (Dexcpt) –This field is set to 1, indicating that the initiator must poll the LOG
SENSE Tape Alert page.
Enable Warning (EWasc) – This field is set to 0, indicating that reporting of warnings is disabled.
Enable Background Function (EBF) – This field is set to 0 indicating that background functions are not
enabled.
Performance (Perf) – This field is set to 0 to indicate that informational exception operations that are the
cause of delays are acceptable.
Method of Reporting Informational Exceptions (MRIE) – This field is set to 0h to indicate that exception
conditions or warnings will not be reported, and that the initiator must poll.
Interval Timer – This field is set to 0000 0000h to indicate that the interval is vendor specific. The library
does not support a timer interval.
Report Count – This field is set to 0000 0000h to indicate that there is no limit on the number of exception
conditions reported.