User's Guide
Table Of Contents
- SCSI Command Support
- SCSI Commands
- Initialize Element Status - 07h
- Initialize Element Status With Range - E7h
- Inquiry - 12h
- Log Sense - 4Dh
- Mode Select (6) - 15h
- Mode Select (10) - 55h
- Mode Sense (6) - 1Ah
- Mode Sense (10) - 5Ah
- Mode Pages
- Move Medium – A5h
- Persistent Reserve In – 5Eh
- Persistent Reserve Out – 5Fh
- Position to Element – 2Bh
- Prevent Allow Medium Removal – 1Eh
- Read Buffer – 3Ch
- Read Element Status – B8h
- Release Element (6) – 17h
- Release Element (10) – 57h
- Report LUNS – A0h
- Request Sense – 03h
- Request Volume Element Address - B5h
- Reserve Element (6) - 16h
- Reserve Element (10) - 56h
- Send Diagnostic - 1Dh
- Send Volume Tag - B6h
- Test Unit Ready (00h)
- Write Buffer (3Bh)
16 SCSI Commands
Standard Inquiry Response
Table 10 Standard Inquiry Response
Bit
Byte
76543210
0 Peripheral Qualifier Peripheral Device Type
1RMB Reserved
2Version
3 AERC Obsolete
NormACA
HiSup Response Data Format
4 Additional Length
5 SCCS Rsvd TPGS 3PC Reserved
PROTECT
6 BQue EncServ BarC MultiP MChngr Obsolete Obsolete Addr16
7 RelAdr Obsolete Wbus16 Sync Linked Obsolete CmdQue SftRe
8
:
15
Vendor Identification
16
:
31
Product Identification
32
:
35
Firmware Revision Level
36
:
54
Full Firmware Revision Level
55 Reserved BarC
56* Reserved Clocking QAS IUS
57* Reserved
58*
Optional Version Descriptor 1
59*
:
n-1*
Optional Version Descriptor n
n*
* When requesting a standard inquiry response from a media changer device logical unit hosted by a DA blade, only
data for bytes 0 to 55 will be returned. Bytes 56 and all following bytes are not returned by media changer device logical
units hosted by a DA blade.