User's Guide

Chapter 12 Installing, Removing, and Replacing
Permanently Removing Expansion Modules From an Existing Library
Scalar i500 User’s Guide 373
2 Add the tape drives to the modules. For details, see Adding,
Removing, and Replacing Tape Drives on page 438.
3 Add the power supplies. For details, see Adding, Removing, and
Replacing Power Supplies on page 414.
4 If your library contains FC I/O blades, install both the I/O blades
and the accompanying fan blades in the expansion module. For
details, see Adding, Removing, and Replacing FC I/O Blades
on
page 443 and Adding, Removing, and Replacing the FC I/O Fan
Blade on page 454.
5 Unpark the robot assembly.
a Gently raise the robot assembly so that it no longer rests on the
parking tab.
1 Y-rail in unlocked, functional position