User's Guide

Chapter 8 Extended Data Lifecycle Management
Incomplete EDLM Scans
Scalar i500 User’s Guide 214
To create the EDLM library managed partition, do the following:
1 From the Web client, select Setup > Partitions.
2 Click Create.
The Create Partition - Basic Settings screen appears (see Figure 33
).
Figure 33 Creating EDLM
Partitions
3 From the Select Partition Type drop-down list, choose Library
Managed (EDLM).
Note: If you plan to use this EDLM partition to scan tapes encrypted
using library managed encryption, you will also need to
configure this partition for library managed encryption, so
that it can request the correct encryption keys from the
encryption key servers. Without the proper encryption keys,
the EDLM scanning drives cannot perform normal or full
scans on encrypted tapes. Once you have created the partition,
select Setup > Encryption > Partition Configuration and
configure the partition for library managed encryption.