User's Manual

Chapter 4: Configuring the Library
Configuring Cleaning Slots
62 Quantum Scalar i40 and Scalar i80 User’s Guide
Note: If the library contains zero import/export (I/E) station slots, you
will not be able to import or export cleaning cartridges. See
Configuring I/E Station Slots on page 63 for more information.
Note: This operation should not be performed concurrently by
multiple administrative users logged in from different
locations. You can access the screen, but you cannot apply
changes while another administrative user is performing the
same operation.
Operator Panel
1 Select Setup > Dedicated Slots > Cleaning.
2 Press Mo
dify.
3 Use the Up and Down buttons t
o select a value from zero to 4.
4 Press Apply.
5 Press Ex
it.
6 Save
the library configuration (see Saving the Library Configuration
on page 101).
Web Client
1 Select Setup > Cleaning Slots.
2 Under the New Settings co
lumn, select the number of cleaning
slots to configure.
3 Click Apply.
4 Save
the library configuration (see Saving the Library Configuration
on page 101).