User's Manual

Chapter 3: Understanding the User Interface
Web Client
Quantum Scalar i40 and Scalar i80 User’s Guide 35
(in the Storage Slots section). The current user’s login privileges
determine which partitions are displayed (see
Privilege Levels on
page 80).
Subsystem Status You can quickly gauge the health of the library by observing the color of
the three subsystem status buttons located at the bottom of the home
page. These buttons provide quick access to information about the
“health” of the library for faster recovery if problems occur. You can
select the buttons to view diagnostic tickets that report problems in the
subsystems.
The three subsystems are:
•
Library — This subsystem represents connectivity, control, cooling,
power, and robotics.
•
Drives — This subsystem represents tape drive components, such as
tape drives, tape drive firmware, and tape drive sleds.
•
Media — This subsystem represents media components, such as
cartridges and barcode labels.
Each button has three states indicated by color. The three states are:
Green (check mark) — No diagnostic tickets exist, or, if any tickets
do exist, they have all been closed.
Yellow (exclamation point) — The library contains open or
unopened, low or high priority diagnostic tickets.
Red (“X” mark) — The library contains open or unopened urgent
diagnostic tickets.
If the color of a subsystem button is red or yellow, you can click the
button to display the corresponding
Diagnostic Tickets screen. This
screen lists library, drives, or media tickets, depending on which button
was selected. See
About Diagnostic Tickets on page 244 for more
information.