User's Manual

Chapter 8: Installing, Removing, and Replacing Components
Installing the Rack Mount Kit (Rail Kit)
Quantum Scalar i40 and Scalar i80 User’s Guide 177
Installing the Rack
Mount Shelves
Before installing the rack mount shelves, you must collect the following
information:
• Type of rack mount rails (square hole, through hole, or threaded
hole)
•D
epth of rack
1 Assemble the rack mount shelves included in the accessory kit (left
and ri
ght):
a The holes used to attach the two halves of the rack m
ount
shelves differ depending on the depth of the rack (see Figure
32
on page 178). It is recommended that you use the ones that are
exposed and have the widest spacing.
8 total
Rail adapter – 4 each of two types are included.
You need 4 for installation; choose the type
appropriate for your rack (for more information,
see Figure
34 on page 180)
8
Allen head screw, countersunk (M4 x 12) – for
mounting shelves to rack
8
Washer, countersunk – for mounting shelves to rack
4
Clip nut (M5 x 0.8) – for securing library in rack
4
Cage nut (M5) – to secure library to rack. Used in
racks with square or round non-threaded holes.
Qty Figure Description