User's Manual

Chapter 4: Configuring the Library
Saving and Restoring the Library Configuration
100 Quantum Scalar i40 and Scalar i80 User’s Guide
Note: Before enabling SSL settings, make sure you enter a name for
the library in the Library Name text box when configuring
network settings (Setup > Network Management >
Network on the Web client; see
Library Host Name on
page 43). After enabling SSL settings, use that library name to
access the library. If you do not use that name, you will receive
a secur
ity alert. In addition, make sure to complete all the text
boxes listed on the Web client Contact Information screen
(Setup > Notification > Contact Information) before
enabling SSL settings. This information is used to identify
company information in the SSL certificate.
Operator Panel
1 Select Setup > Security Services > SSL.
2 Press Mo
dify to change the setting.
3 Save
the library configuration (see Saving the Library Configuration
on page 101).
Saving and Restoring the Library Configuration
The library has many configurable items, such as tape drive IDs,
partitions, user accounts, import/export (I/E) stations, and cleaning slots.
In the event of a hardware failure or firmware upgrade, the save and
restore operations can be used to restore the library's configurable items
to a previous state. The save/restore operation also saves and restores
library firmware and license keys installed on the library.
Note: The save/restore operations should not be performed
concurrently by multiple administrative users logged in from
different locations. You can access the screens, but you cannot
apply changes while another administrative user is performing
the same operation.