User's Manual

Chapter 4: Configuring the Library
Configuring Security Settings
Quantum Scalar i40 and Scalar i80 User’s Guide 97
Configuring Security Settings
You can enable/disable the following security settings on the operator
panel:
•
Network Interface
• SSH Services
• Internet Control Message Protocol (ICMP)
• Remote Access Via Web Client
• Remote Service Login
• SSL
Network Interface Enables or disables all external access to the library. This setting is
enabled by default to allow external access.
Operator Panel
1 Select Setup > Security Services > Network IF.
2 Press Mo
dify.
3 Sc
roll to select Enabled or Disabled and press Apply.
4 Make anothe
r selection or press Exit.
5 Save
the library configuration (see Saving the Library Configuration
on page 101).
SSH Services Enables or disables Secure Shell (SSH) services, such as SSH, from
accessing the library. This setting is enabled by default.
Operator Panel
1 Select Setup > Security Services > SSH Services.
2 Press Mo
dify.