User's Manual

Chapter 4: Configuring the Library
Working With LDAP User Accounts (Remote Authentication)
Quantum Scalar i40 and Scalar i80 User’s Guide 91
so now. For instructions, see Generating the Kerberos Service Keytab
File on page 91. Then click the Browse button to upload the file.
5 Configure
the LDAP settings as described in Enabling and
Configuring LDAP on the Library on page 88.
6 Click Apply to apply any changes.
7 If
you enabled LDAP or Kerberos, or modified LDAP or Kerberos
settings, click the Test LDAP button to test all the new or changed
LDAP settings.
Note: The Test button tests communication between the library
and the LDAP server. If you changed the LDAP settings, click
Apply before using this button.
8 Save the library configuration (see Saving the Library Configuration
on page 101).
Generating the
Kerberos Service Keytab
File
1 Set up an Active Directory domain on the Windows 2003 server.
2 At th
e command prompt, enter dcpromo.
3 Windows 2003 servers only: Instal
l Windows Support Tools on the
Windows 2003 server as follows:
a Go to
www.microsoft.com and search for “windows server
2003 support tools sp2” or click on the following link:
http://www.microsoft.com/downloads/
details.aspx?FamilyID=96a35011-fd83-419d-939b-
9a772ea2df90&DisplayLang=en
b Download both support.cab and suptools.msi.
c Run suptools.msi to be
gin installation.
4 Cre
ate a computer account in Active Directory.
• Do not select any of the check boxes during creation.
• The account name will be used for <computer account> fields
sho
wn in the following steps.