User's Guide

Appendix A: MIBs Implemented
Downloading the SNMP MIB from the Library
Scalar i40 and Scalar i80 Basic SNMP Reference Guide 21
SYNTAX INTEGER { good(1), failed(2), degraded(3), warning(4),
informational(5), unknown(6), invalid(7)}
CleaningStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Device cleaning status."
SYNTAX INTEGER { recommended(1), notNeeded(2), required(3) }
--
-- Overall Tape Library parameters
--
libraryIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address of this SNMP agent. If the
library has only an IPV4 address, or both an
IPV4 and an IPV6 address, then the IP address is
displayed in IPV4 format (xxx.xxx.xxx.xxx). If
the library only has an IPV6 address, then it
will report an IPV6 address."
::= { smallTapeLibrarySystem 1 }
librarySNMPAgentDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Description of the library SNMP agent."
::= { smallTapeLibrarySystem 2 }