User`s guide

Scalar i6000 User’s Guide 523
For SDLT II media barcodes, the library dynamically supports 1 to 6
characters for volume serial number plus a one- character media type
identifier. The image below is an example of a supported SDLT II barcode
label.
character media identifier
must be a “2”
For DLT-S4 media barcodes, the library dynamically supports 1 to 6
characters for volume serial number plus a one-character media type
identifier. The media identifier should be “4”.
What barcode formats are supported?
1Cartridges must have an
external barcode label that is machine-readable to identify the volume
serial number. A barcode must use only uppercase letters A to Z and/or
numeric values 0 to 9. The library currently supports Code 39 (3 of 9) type
barcode labels.
What do I do if I lose my password?
1Contact technical support and
they will tell you how to reset the password. See
Getting More
Information or Help Updated Contact Info on page 6.
What do I do if I lose power during a backup?
1If your library
contains a redundant power supply, it is unlikely that power will ever be
completely unavailable to the library.
The library should recover even if power goes
out completely during a
backup. If power remains off, press the Power button and leave it in the
off position until you can obtain a reliable power source. When the power
to the library is turned back on, the library will recover. You must re-run
the backup using your application software.
If the library does not automatically come back
up after a power outage,
cycle library power. Cycling library power involves shutting down the
library, powering it off, and then powering it on. For more information,
see
Shutting Down/Rebooting the Library on page 316, Powering Off the
Library on page 317, and Powering On the Library on page 318. The
blue LED on the power supply will be on
and not blinking.