User`s guide

Chapter 7 Working With Cartridges and Barcodes
Managing Media
Scalar i6000 User’s Guide 513
The following table describes the elements on the Import Media
dialog box.
Element Description
Media ID The volume serial numbe
r of the cartridge.
Slot The number of the slot in the I/E station magazine.
To understand the location
designation, see
Understanding Location Coordinates on page 288.
IE Station The number of the module. To understand the location designation, see
Understanding Location Coordinates on page 288.
Magazine The number of the magazine (se
ction) where the slot is located, numbered from
the top down. To understand the location designation, see
Understanding
Location Coordinates on page 288.
Results “Imported” or “Failed”.
6 Cl
ick a cartridge to highlight it, and then click Import.
The picker automatically moves the cartridge from the I/E station to
the fir
st available empty slot in that partition. You cannot manually
specify the slot.
Exporting Cartridges
From Partitions 7
When partitions are created, specific I/E station slots are associated with
that partition. When you export cartridges in a library with partitions,
cartridges are exported to the partition’s I/E station slots. You can only
export cartridges if I/E station slots for that partition are empty.
1 Ma
ke sure that you are viewing the partition from which you want to
export a data cartridge. From the View menu, click the name of the
appropriate partition.
2 Click Operations > Expor
t or click the Export toolbar button.
The physical library must be online.
If the partition is not offline, you receive a message
that asks you whether you want to take it offline.
Click Yes.
Note