User`s guide

Chapter 6 Maintaining Your Library
Maintaining Air Filters
Scalar i6000 User’s Guide 500
Removing an Air Filter 6
Use these instructions to remove either a top or bottom air filter.
Required tools: #1 Phillips screwdriver
FRU ID: 1001 (air filter)
1 Take the library offline.
For information about taking the library offline, see Changing the
Library’s State on page 303.
2 On the operator panel, press Robotics Enabled to turn off power to
the picker and return it to the home position.
The power is on to all other components.
3 Open the access door.
Aisle power is disabled.
4 Use the Phillips screwdriver to unscrew the two retaining
thumbscrews. The screws remain attached to the retaining bar.
5 Remove the air filter.
thumbscrew
retaining bar
thumbscrew