User`s guide

Chapter 2 Description
Mixed Media Support and Rules
Scalar i6000 User’s Guide 34
However, drives must be installed beginning in the lower most drive slot
of the control module. Once the control module has 12 drives installed
from bottom to top, you must move to the bottom drive position of the
first expansion module.
• The library must include at least one drive for
each type of cartridge
used.
• Magazines must be installed in the control module beginning with
the back
rack (drive side). Once the back rack (drive side) is full, you
must then install magazines in the door side, starting with the top left
corner. See figure
10.
• The secondary media type is installed beginning at stor
age slot 4096
or the first media magazine. See figure
10.
Figure 10 Magazine
Installation Order
door sidedrive side
tape drives
X-axis rail
magazines must
be installed from
top to bottom
tape drives