User`s guide

Chapter 6 Maintaining Your Library
Maintenance Actions
Scalar i6000 User’s Guide 414
7 Click Yes.
The rescue image timestamp that appears on the Save and Restore
Library Configuration dialog box will be updated to indicate that the
file has changed.
If no rescue image exists, the library prompts you to decide if you
want to generate one.
If the save operation succeeds, a message appears that indicates the
name of the image file that was saved to the remote file system. If the
save operation does not succeed, a message appears that describes
the error that occurred.
Saving a Local Rescue Image 6
Use the Save Rescue command to save a library configuration rescue
image locally on the library’s file system. To make sure that the image
captures all library configuration changes, you should save the image
often.
1 Log on as an administrator from the remote client or from the
library’s touch screen.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Tools > Save/Restore.
The Save and Restore Library Configuration dialog box appears.
4 Click Save Rescue.
The save rescue operation starts.
If the save rescue image operation succeeds, a message appears that
indicates that the rescue image file was saved to the library file
system. The rescue image timestamp displayed on the Save and
Restore Library Configuration dialog box will be updated to
indicate that the file has changed.
If the save rescue operation does not succeed, a message appears that
describes the error that occurred.