User`s guide

Chapter 6 Maintaining Your Library
Maintenance Actions
Scalar i6000 User’s Guide 407
The Select Firmware Tapes dialog box appears.
4 Select the tape cartridges you want to use for the firmware update by
checking the check boxes in the media table, and click OK.
5 Click Start.
A message Updating do not power cycle the drive is displayed
above the drive table in red.
The Status column in the drive table displays the status of the update.
Note
You can perform a firmware update only for drives
of the same product (such as HP or IBM), and type
(such as LTO-4 or LTO-5).
CAUTION
Do not power cycle the drive.