User`s guide
Chapter 6 Maintaining Your Library
Maintenance Actions
Scalar i6000 User’s Guide 378
5 Perform one of the following tasks:
• To reset either an entire I/O blade, an individual Fibre Channel
port on an I/O blade, or the Fibre Channel port on the MCB, click
the I/O blade or the port to highlight it, and then click Reset.
• To cycle the power for an I/O blade, click the I/O blade to
highlight it, and then click Power Cycle.
• To cause the LEDs on an I/O blade to blink rapidly so that you
can easily find it in the library, click the I/O blade to highlight it,
and then click Identify.
When you click Identify, the following dialog box appears.
6 After you find the I/O blade, click Turn Off LED.
Capturing Snapshots 6
The Capture Snapshot command enables you to capture detailed
information about the entire library in a single file and save it to disk or
mail it to technical support. The captured information consists of
configuration data, status information, and trace logs for library
components, including the LMC, the MCB, the CMB, the robotics control
subsystem (RCS), and the I/O blades.
Trace logs collect problem data for up to 72 hours of continuous library
operation. They provide Quantum engineering personnel with vital
library information for troubleshooting and solving problems. You should
capture snapshots when technical support requests them.