User`s guide

Chapter 6 Maintaining Your Library
Maintenance Actions
Scalar i6000 User’s Guide 374
2 Perform one of the following tasks:
• To indicate that you want to send the log as an e-mail message to
a recipient, select Emai
l, and then either type an e-mail address
in the Email text box or select an existing address from the drop-
down list. You can type a comment in the Comment text box to
send with the log.
• To indicate that you want to save the log, select Sa
ve, and then
either type in the Save text box a path and a file name to which
you want the information saved or click Browse to specify a
location and a file name.
3 To send, click OK.
Cleaning a Drive
6
Use the Drives dialog box to manually initiate a drive cleaning operation.
When cleaning a drive, you can use cleaning media inserted in the I/E
station or media in an assigned cleaning magazine.
If the host application coordinates drive cleaning,
or if automatic drive cleaning is enabled for the
partition, you do not need to manually initiate a
drive cleaning operation to perform routine
cleaning tasks. In these cases, routine cleaning is
handled by the host application or the library, and
you should manually initiate a drive cleaning
operation only as part of a troubleshooting
procedure.
Before you manually initiate a drive cleaning operation, you must add
cleaning media to the library. (The cleaning media must be appropriate for
the type of drive being cleaned, for example, LTO or DLT.)
There are two ways to add cleaning media to the library:
• Insert cleaning media into the I/E
station and close the I/E station
door.
Note
The Save option is available to remote client users
only. It appears grayed out on the touch screen.
Note