User`s guide

Chapter 6 Maintaining Your Library
Maintenance Actions
Scalar i6000 User’s Guide 367
The following table describes the elements on the Drives dialog box.
Element Description
In the Drive(s) area:
Drive Type
drop-down list
Enables you to select the type of drives you want to list on the Drives dialog
box (for example, LTO1 for LTO-1 tape drives). All lists every drive in the
library.
State The state of the drive (Varied On or Varied Off).
Drive Type The type of drive (for example, LTO2 - FC).
Location The location of the drive by means of a coordinate system. For information
about location coordinates, see Understanding Location Coordinates
on
page 288.
RAS The status of the drive as reported by the RAS system (for example, Good or
Failed).
WWN/SCSI ID Indicates either:
• For Fibre drives only, the World Wide Name of the drive, or
• For SCSI drives only, the SCSI ID of the drive
Volser If a cartridge is loaded in the specified drive, the volume serial number of the
cartridge.
Partition Name The name of the partition to which the drive is assigned.