User`s guide

Chapter 5 Running Your Library
Viewing the Library (Physical or Partition)
Scalar i6000 User’s Guide 301
• Cluster — the cluster designation for the I/O management unit is
always 1.
• Bay — there are ei
ght bays in the I/O management unit. If you look
at the I/O management unit from the back of a library module, bay 1
is the bay on the lower left. Bay 1 is not populated. Bay 2 always
contains a management control blade (MCB). No I/O blades can be
installed in bays 1 or 2. Bays 3 through 5 can contain I/O blades.
Table 31 Blade Location
Coordinates
1 1-8 1 1 3-8
Aisle Module Rack Cluster Bay
Viewing the Library (Physical or Partition)
The View menu enables you to view details about the physical library or
a specific partition in the library information panel area of the main LMC
display. It also provides access to the Manage Views dialog box from
which you can quickly select between library views (physical or
individual partitions) and take the physical library or a partition online or
offline.
Before you can begin many of the library
operations that this guide describes, you must first
set the library view to either the physical library or
a partition.
Displaying the Physical
Library or a Partition 5
From the View menu, click the name of the physical library or a partition.
The physical library is listed at the top of the View menu. Individual
partitions, if they exist, are listed below the physical library.
Note