User`s guide

• Tape drives that are installed in rack 1 of a
control module or an expansion module replace
storage in columns 1 and 2. Because drives are
installed from the bottom to the top, you lose the
storage starting in section 10 first. You do not
lose the magazine in columns 1 and 2 of section
5.
• Column 1 never contains storage in the control
module.
Chapter 5 Running Your Library
Understanding Location Coordinates
Scalar i6000 User’s Guide 291
Figure 31 on page 292 shows the section, column, and row numbering for
rack 2 of a library that contains LTO cartridges. See figure
29 on page 289
to review rack numbering.
The cartridges in the 24-slot LTO I/E station are
addressed as part of column 3 and are in sections 1
through 4 (top to bottom). When you have an I/E
station installed on rack 2, there are no cartridges
in columns 3 and 4 of section 5. See
figure 31 on
page 292.
Note
Note