User`s guide

Chapter 5 Running Your Library
Library Management Console (LMC)
Scalar i6000 User’s Guide 286
System Status Buttons 5
System status buttons are located in the Overall System Status area at the
bottom of the LMC (see figure
27).
Figure 27 System Status
Buttons in Good Status
Each button represents a subsystem. Table 29 shows the library
subsystems and some of the components that each subsystem
represents.
Each field replaceable unit (FRU) in the library belongs to one of the
subsystems.
Table 29 Subsystems and
Their Components
Subsystem Components
Drives Drives and media, such as brick firmware, drive bricks, drive sleds, cartridges,
and
magazines
Robotics Assemblies and processors involved in th
e movement and handling of library
media, such as the IEX board, I/E stations, the pivot and reach assemblies, system
barcode labels, doors, filters, the accessor, drive mounts, rails, and carriages
Connectivity Host connectivity components, such as I/O management units,
I/O blades, and
the chassis management blade (CMB)
Power Power supplies and related hardware, such a
s the power distribution unit (PDU),
power chassis, and fuses
Control Main processor cards and related hardware and
software, such as system
firmware, the management control blade (MCB), the robotics control unit (RCU),
the library motor drive (LMD), and the operator panel