User`s guide

Chapter 5 Running Your Library
Logging On and Off
Scalar i6000 User’s Guide 266
Accessing the LMC Applet 5
After verifying that the host computer meets the software requirements
and has network access to the library, access the LMC applet and log on.
1 On the
host computer, point your web browser to the IP address of
the library.
The first time you access the LMC applet it
is downloaded to the host
computer. Downloading the applet can take several minutes
depending on the speed of the network. Once the applet is
downloaded, it is stored on the host computer and does not need to
be downloaded again.
2 If a secu
rity warning appears asking if you are sure you want to run
the applet, click Run or Yes.
The Scalar i60
00 Logon dialog box appears.
3 In the Name text box, type the name of the user or administrator
account with which you want to log on. If you want to log on with the
default administrator account, type admin.
• User names and passwords are case-sensitive.
• Only one administrator at any given time can be
logged on to the library.
• If you want to log on using the default
administrator
account (admin), and you do not
remember the password, contact technical
support to reset the password.
4 In the Passwor
d text box, type the password for the user or
administrator account.
Note