User`s guide

Chapter 4 Configuring Your Library
About the Configuration Record
Scalar i6000 User’s Guide 260
Network information — Hostname, DHCP status, IP address, and IP,
Netmask, and Gateway addresses
Partition information — Serial number
s, online/offline statuses, and
numbers of slots, drives, and I/E slots
Drive information, for each drive — Location, partition, SCSI element
addre
ss, online/offline status, vendor, model, serial number, logical
serial number, firmware version, drive type, and interface type:
SCSI tape drives — SCSI ID
Fibre Channel (FC) tape drives — World Wide Name (WWN)
and loop ID,
speed, and connection type
If the FC tape drive is attached to an FC I/O blade,
the WWN indicates the WWN of the I/O blade, not
the tape drive.
I/O blade information — Blade type, location, firmware version,
serial number, WWN, and CC LUN
Before you can e-mail the configuration record,
the library e-mail account
must be configured. For information on configuring the library e-mail
account, see
Configuring E-mail on page 164.
For instructions on how to e-mail or
save the configuration record, see
Mailing or Saving the Configuration Record on page 356.