User`s guide

Chapter 4 Configuring Your Library

EKM Management Solutions

Scalar i6000 User’s Guide 237

Step 2: Configuring the SKM Server 4

Server settings are only used when a partition's encryption method is set

to “Enable Library Managed.” For more information on partitions, see

Working With Partitions on page 112.

In order to synchronize properly, the TCP/IP and

SSL ports on the primary and secondary SKM

servers must be set to the same values.

Synchronization causes the entire configuration

properties files of the primary server to overwrite

the configuration files on the secondary server.

Because the TCP/IP and SSL ports are listed in the

configuration properties files, the primary and

secondary servers must use the same TCP/IP and

SSL port settings.

1 From the menu bar, click Setup > Encryption > Server

Configuration.

The SKM Serv

er Configuration dialog box appears.

SKM server settings are used only when a

partition's encryption method is set to “Library

Managed.

Note