User`s guide

Enabling SSL can impact the network performance

of remote operations (for example, downloading

new library software).

Chapter 4 Configuring Your Library

Configuring Library Security

Scalar i6000 User’s Guide 226

• Callback Port Range — To configure firewall access for server

callbacks to remote clients, type the first port number of a range

of ports that you want to be used for callbacks in the Starting text

box, and then type the last port number in the Ending text box.

Valid port ranges must fit within the range 1024 to 65535. Remote

client service ports must be within the range of ports specified

here. Otherwise, callbacks fail because the library’s firewall

blocks outbound packets designated for out-of-range ports.

• Serv

ice Login — To allow service login, select Enable. To

prevent service login, select Disable. The Admin user can enable

or disable the service user login on both the front panel access

and the remote client access.

The default service login through the service port

is still available for use. For security purposes, the

service port can be physically locked down by

locking the back door of the i6000.

• Session — To configure the length of the session’s timeout, type

or use the arrow buttons to specify the length of a session before

it times out. Valid session timeouts are 1-1440 minutes (1 minute -

24 hours), where the default is 30 minutes.

3 If you want to appl

y the changes, but you do not want to close the

dialog box, click Apply. Otherwise, click OK to apply the changes

and close the dialog box.

Note